The pickup truck driver tried to beat traffic while turning left and didn't yield to oncoming traffic, causing a multi-car crash.
Category: eMobility
If You’ve Been Saying You’re Waiting For A Good Non-Tesla Electric Car, Now Is The Time!
I had this article title drafted up a while back. It had just hit me that there were really several highly competitive, highly compelling electric vehicles on the market now — even in the USA — and that it’s now a prime time for mainstream car buyers to start going electric. So, I wrote the […]
The Need To Dig Deeper Into Corporate Climate Disclosures
The SCC rule faces opposition from some business groups that point to costs and difficulties in compliance. Litigation is certain, and the SEC is weighing opposition as it finalizes the rule.
Chery to be 1st automaker to adopt CATL’s sodium-ion batteries
In the passenger car segment, sodium-ion batteries can generally meet the needs of models with a range of up to 400 kilometers, a CATL executive previously said.
CATL's sodium-ion batteries are not far from starting to be installed in vehicles, after the Chinese power battery giant unveiled the new batteries in July 2021.
CATL's sodium-ion batteries will first be used in Chery's models, the battery maker announced today.
Sodium-ion batteries will break through resource bottlenecks and is a cost-effective choice, CATL said, without giving further details.
CATL will hold a zero-carbon strategy launch event from 15:00 to 15:20 on the first day of the Shanghai auto show on April 18. Its booth at the event is 8B05 in Hall 8.2.
CATL unveiled its first-generation sodium-ion battery on July 29, 2021, saying that the energy density of the cell alone had reached 160Wh/kg.
The company said at the time that the energy density of the first-generation sodium-ion battery was slightly lower than that of the lithium iron phosphate battery. However, it has obvious advantages in low-temperature performance and fast charging, especially in high-power application scenarios in alpine regions.
CATL's next-generation sodium-ion battery energy density will exceed 200Wh/kg, it said in 2021, adding that the company has already started the industrialization layout of sodium-ion batteries and plans to form a basic industrial chain in 2023.
CATL did not mention the possible areas of use for sodium-ion batteries in its brief launch event at the time, although industry sources and analysts generally believe that the batteries, with their low energy density, will probably be used mainly in energy storage and two-wheeled vehicles.
On November 29, 2022, Huang Qisen, vice president of CATL research institute, said at a forum that sodium-ion batteries are expected to be carried in electric vehicles, the first time someone from the power battery giant publicly mentioned the prospect of using this new battery in passenger cars.
As for applications in passenger cars, sodium-ion batteries generally meet the needs of models with a range of up to 400 kilometers, Huang said at the forum.
With its pioneering AB battery system integration technology, CATL has achieved a mix of sodium ion and lithium ion, allowing them to complement each other and thus increase the energy density of the battery system, Huang said at the time.
This approach is expected to enable sodium-ion batteries to support electric vehicle models with a range of up to 500 kilometers, he said, adding that models with that range account for 65 percent of the market share, meaning the use of sodium-ion batteries is promising.
Notably, two months ago, an unnamed Chinese power battery maker had already begun fitting sodium-ion batteries into passenger cars.
On February 23, Hina Battery unveiled three sodium-ion battery cell products and announced a partnership with Anhui Jianghuai Automobile Group Corp (JAC), one of whose models became the first to carry sodium-ion batteries.
Hina Battery and Sehol, a joint venture between JAC and Volkswagen Anhui, have jointly built a test vehicle with sodium-ion batteries based on the latter's Sehol E10X model.
The test vehicle has a battery pack with a capacity of 25 kWh and an energy density of 120 Wh/kg. The model has a range of 252 km and supports fast charging from 3C to 4C. The battery pack uses cells with an energy density of 140 Wh/kg.
Hina Battery becomes 1st battery maker to put sodium-ion batteries in EVs in China
The post Chery to be 1st automaker to adopt CATL's sodium-ion batteries appeared first on CnEVPost.
For more articles, please visit CnEVPost.
The Electric Ute Roadshow
After a few minor glitches, the Solar Citizens Electric Ute Roadshow is touring regional cities in Victoria. Solar Citizens is displaying its LDV eT60 to amazed and enthusiastic audiences, including many politicians who have never seen an electric ute before. “Clean Transport Campaigner”Ajaya Haikerwal tells me it was a relief to finally get on the […]
Our Cleveland Duplex Case Study: The All Electric Side Saves Money Compared To The Gas Side
We replaced an old water heater and furnace with all-electric heat pumps on the south side, while the north side still has gas systems which we plan to replace in a year or two. After collecting a full year of data, we are excited to report that the all-electric side had cheaper upfront costs, the […]
US: Genesis BEV Sales Reached New Record In March And Q1 2023
The company reports the first sales of the Genesis Electrified GV70.
XPeng unveils new vehicle platform that promises faster model rollouts and greater cost savings
The G6 will be the first new model built on SEPA 2.0, and XPeng will soon launch 10 new models based on the new platform with greater cost savings. | XPeng US XPeng HK
XPeng (NYSE: XPEV) has unveiled its next-generation vehicle technology architecture, which it hopes will help it stay relevant in an increasingly competitive market.
The electric vehicle (EV) maker unveiled the architecture, called SEPA (Smart Electric Platform Architecture) 2.0, at a launch event in Shanghai today, saying that the new SUV G6, which will be unveiled on the first day of the Shanghai auto show on April 18, will be the first new model to be built on SEPA 2.0.
The Shanghai auto show will be held at the National Exhibition and Convention Center from April 18-27, with media days from April 18-19, professional visitor days from April 20-21, and general public admission from April 22-27.
SEPA 2.0 brings more advanced architectural solutions to support XPeng's full-stack in-house development from autonomous driving software to vehicle engineering, the company said.
The architecture will shorten the R&D cycle of future models by 20 percent and optimize development efficiency significantly. Interchangeability and interoperability of common and modular components between new models will reach 80 percent, enabling XPeng to meet diverse customer needs at an optimized cost, it said.
SEPA 2.0 is adaptable and flexible for multiple vehicle platforms with wheelbases between 1,800 mm and 3,200 mm and can be expanded to support a wide range of vehicle types, including sedan, coupe, hatchback, wagon, SUV, MPV and pickup truck.
"We envision that this evolutionary intelligent architecture will lead smart EV technology development for the next three years. It will make rapid advancements in technology available for our customers as standard, with faster software upgrades, stunning cost savings and elevated product experience," said XPeng chairman and CEO, He Xiaopeng.
Mr. He believes that reaching 3 million units in annual sales is the foundation for an electric vehicle company to stay in the game, while cost control, efficient R&D, and high-end experience are necessary for survival and will be the basis for globalization efforts.
Over the past five years, XPeng has invested more than RMB 10 billion ($1.46 billion) in R&D on vehicle architecture, Mr. He said, adding that based on a better platform, XPeng will soon launch 10 new models with greater cost savings.
Technical details of new platform
SEPA 2.0 will accelerate the inclusion of XPeng's smart technologies including XNGP Advanced Driver Assistance System (ADAS), Xmart OS in-car operating system, and X-EEA electrical and electronic architecture, the company said.
With the SEPA 2.0 architecture, the overall R&D efficiency of XPeng's in-house developed full-scenario ADAS solution XNGP will be increased by 30 percent and the cost of ADAS software model adaptation will be reduced by 70 percent, according to Mr. He.
XNGP is the ultimate form of driver assistance, and all of XPeng's future models in the Chinese market will be equipped with it as standard, according to Mr. He.
Backed by its autonomous driving supercomputing center, XNGP will continue to evolve and upgrade its assisted driving skills with the goal of taking over less than once per 1,000 kilometers for highway scenarios by 2023 and less than once per 100 kilometers for urban scenarios by 2025.
Based on the SEPA 2.0 R&D platform, Xmart OS software adaptation cost will be reduced by 85 percent, voice software development cycle will be reduced by 50 percent, and voice assistant service cost will be reduced by 50 percent, according to XPeng.
Xmart OS leverages a multi-sensor software and hardware platform to enhance and transform control and driver-vehicle interaction. Powered by artificial intelligence, supercomputers and underlying models, Xmart OS can make intelligent decisions to optimize control of cabin functions, the company said.
XPeng's X-EEA electrical and electronic architecture allows for 50 percent optimization of overall vehicle development costs, a 30 percent reduction in software iteration cycles and a 300 percent increase in OTA update speed, it said.
The company's architecture-based solutions improve charging efficiency, which includes an 800-volt high-voltage silicon carbide (SiC) platform that allows batteries to be charged 50 percent faster than the previous generation.
XPeng's latest platform uses a standard 3C battery configuration with a battery that adds 130 kilometers of vehicle range in five minutes and can be charged faster at its S4 supercharger facility, adding 200 kilometers of range in five minutes, according to the company.
The company's in-house developed XPower 800-volt high-voltage oil-cooled flat-wire silicon carbide integrated powertrain system increases maximum powertrain efficiency to 97.5 percent and overall powertrain efficiency to 92 percent, it said.
The X-HP smart thermal management system provides an intelligent, systematic energy-saving solution that increases range by 15 percent in cold conditions. It also improves battery cooling performance by 100 percent, resulting in a 90 percent increase in charging power.
XPeng will use integrated aluminum die-casting technology on the SEPA 2.0 architecture to deliver more stable handling and better driving performance.
The integrated die-cast body gives 83 percent more torsional rigidity than a conventional body, while the body weight is 17 percent less than a conventional body, further improving range.
The architecture also includes CIB (Cell Integrated Body) technology, which allows the battery pack to be integrated into the body, not only increasing vertical space, but also improving battery safety, according to XPeng.
The CIB battery pack features an 80-ton side-impact resistant design and an IP68 water and dust resistant design that meets the highest safety standards in three major markets: China, North America and Europe, it said.
XPeng's chassis platform will be compatible with a wide range of suspension systems, providing superior mechanical quality and excellent handling performance, it said.
XPeng aims to have an intelligent manufacturing system in place by 2025, including the Zhaoqing plant, the Guangzhou base and several future projects, with all manufacturing facilities integrated with SEPA 2.0 through technology upgrades.
First model based on SEPA 2.0 coming soon
The first new model based on the SEPA 2.0, the XPeng G6 coupe SUV, will be unveiled at the Shanghai auto show on April 18, the company said. XPeng's previous announcement showed it would hold a launch event on April 18 from 9:40-10:00 am
XPeng did not reveal more information about the G6 today, although information about the specifications of the SEPA 2.0 platform suggests that the model will be based on the 800 V platform and will be more cost-efficient.
On March 17, XPeng management said during the company's Q4 earnings call that the G6, a new energy SUV with a price range of RMB 200,000-300,000, will be officially launched and delivered by the end of the second quarter.
XPeng's monthly sales target for the G6 is two to three times that of the P7, Mr. He said during that call.
The G6 will have a significantly improved range that will exceed expectations and will have much more interior space than similar offerings from competitors, he said previously.
In a research note sent to investors on March 22, Deutsche Bank analyst Edison Yu's team said the upcoming G6 will be the swing factor that the model will need to succeed in order to make XPeng truly relevant in the market again.
XPeng will likely price the G6 similarly to the Tesla Model Y, hoping to attract consumers with its sleeker design and updated interior, the team said.
With increased G6 production, XPeng management believes total monthly deliveries could reach 15,000 units at some point in the third quarter, the team noted.
"This seems achievable and we model XPeng reaching this level in Sep," Yu's team previously wrote.
($1 = RMB 6.8714)
The post XPeng unveils new vehicle platform that promises faster model rollouts and greater cost savings appeared first on CnEVPost.
For more articles, please visit CnEVPost.
VW ID.7 Final Teaser Offers A Peek Into The Cabin Hours Before Debut
The all-new Volkswagen ID.7 will make its global debut on April 17.
EV models outnumber PHEV choices for the first time since 2014
Plug-in hybrid tech continues to be something that neither automakers nor regulators can completely agree on. Some, like Toyota, Volvo, BMW, and others see them as a smart, effective bridge technology to EVs while others, including GM and Honda see them, at least for now in the U.S., as an unnecessary complication in the shift to EVs. In light of... 